Display hidden notes to specifier. (Don't know how?Click Here)
** NOTE TO SPECIFIER ** Guardian Traffic Systems, LLC; Traffic controls and traffic signage. . This section is based on the products of Guardian Traffic Systems, LLC, which is located at:
GUARDIAN TRAFFIC SYSTEMS manufactures an extensive and impressive line of Access and Traffic Control products sold around the world for commercial, government, education and military applications helping to solve your traffic or access control problems. COBRA Traffic Spike Systems are designed and engineered to allow traffic to proceed freely in one direction only. Cobra Systems provide extremely effective one-way directional traffic control. STINGRAY Pedestrian Friendly Concealed Traffic Systems are engineered and designed with below grade spikes that will puncture the tire of offending vehicles while providing above grade non-penetrating teeth. ENFORCER Motorized Traffic Spike Systems provide reliable access traffic control by electro-mechanically moving the teeth up to an active or secured position, and then down to allow unrestricted passage to authorized vehicles.
PART 1 GENERAL
1.1 SECTION INCLUDES
** NOTE TO SPECIFIER ** Delete items below not required for project.
A. Traffic control equipment.
1.2 RELATED SECTIONS
** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.
A. Section 02840 - Traffic Barriers.
B. Section 02840 - Walk, Road and Parking Appurtenances.
C. Section 11150 - Parking Control Equipment.
1.3 SUBMITTALS
A. Submit under provisions of Section 01300.
B. Shop Drawings:
1. Provide layout of traffic control ground spikes showing coordination with parking equipment and drive lanes.
** NOTE TO SPECIFIER ** Delete if not required.
2. Provide layout of control/access equipment with electrical schematics if motorized or monitored.
C. Product Data: Manufacturer's data sheets on each product to be used, including:
1. Preparation instructions and recommendations.
2. Storage and handling requirements and recommendations.
3. Installation methods.
1.4 QUALITY ASSURANCE
A. Manufacturer's Qualifications: Not less than 5 years experience in the actual production of specified products.
B. Installer's Qualifications: Firm with not less than 5 years experiences in installation of systems similar in complexity to those required for this Project, including specific requirements indicated.
** NOTE TO SPECIFIER ** Include a mock-up if the project size and/or quality warrant taking such a precaution. The following is one example of how a mock-up on a large project might be specified. When deciding on the extent of the mock-up, consider all the major different types of work on the project.
C. Mock-Up: Provide a mock-up for evaluation of surface coordination and application workmanship.
1. Install in areas designated by Architect.
2. Do not proceed with remaining work until workmanship and operation are approved by Architect.
3. Modify mock-up area as required to produce acceptable work.
1.5 DELIVERY, STORAGE, AND HANDLING
A. Store products in manufacturer's unopened packaging until ready for installation.
B. Store and dispose of solvent-based materials, and materials used with solvent-based materials, in accordance with requirements of local authorities having jurisdiction.
1.6 PROJECT CONDITIONS
A. Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's absolute limits.
1.7 WARRANTY
** NOTE TO SPECIFIER ** Refer to manufacturer's literature fro limited extended warranties available on products offered. Delete if not required.
A. Limited Warranty:
PART 2 PRODUCTS
2.1 MANUFACTURERS
A. Acceptable Manufacturer: Guardian Traffic Systems, LLC; 4261 S. Country Club Rd.; Tucson, AZ 85714-2009; Toll Free Tel: (800) 866-9115; Tel: (520) 881-3380; Fax: (520)320-1820; Email:sales@guardiantraffic.com. Web:www.guardiantraffic.com.
** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.
B. Substitutions: Not permitted.
C. Requests for substitutions will be considered in accordance with provisions of Section 01600.
** NOTE TO SPECIFIER ** Guardian Traffic Spike Systems are engineered to be used at a maximum speed of 5 miles per hour. Vehicles must pass over the unit so that the tire is parallel to the teeth and not at any angle. Traffic Spike Systems require Warning Signs. Locating and installing a Traffic Spike System incorrectly or not using warning signs invalidates any implied or real warranty. Delete if not required.
2.2 TRAFFIC CONTROL TIRE SPIKES
** NOTE TO SPECIFIER ** Traffic Spike Systems are designed and engineered to allow traffic to proceed freely in one direction only. Cobra Systems provide extremely effective one-way directional traffic control. Delete if not required.
A. Construction:
1. Provide design of modular construction allowing width adjustment. Durable spring loaded teeth with counter-balanced back-up. Specially engineered teeth that eliminates tire damage in unrestricted direction. Built-in latch down.
2. Heavy duty steel construction, top plate mounted components with durable stainless steel spring. Zinc plated moving parts.
** NOTE TO SPECIFIER ** Delete if not required.
B. In-Ground Traffic Spike Systems:
1. Product: As manufactured by Guardian Traffic Systems, LLC.
** NOTE TO SPECIFIER ** Delete product not required.
a. Model 1130.100: 3 feet (914mm) COBRA In-ground Traffic Spike Section.
b. Model 1130.120: 3 feet (914mm) COBRA In-ground Traffic Spike Section - Galvanized.
c. Model 1130.150: 3 feet (914mm) COBRA In-ground Traffic Spike Section - Non-Penetrating Teeth.
d. Model 1130.170: 3 feet (914mm) COBRA In-ground Traffic Spike Section - Non-Penetrating Teeth - Galvanized.
e. Model 1160.100: 6 feet (1829mm) COBRA In-ground Traffic Spike Section.
f. Model 1160.120: 6 feet (1829mm) COBRA In-ground Traffic Spike Section - Galvanized.
g. Model 1160.150: 6 feet (1829mm) COBRA In-ground Traffic Spike Section - Non-Penetrating Teeth.
h. Model 1160.170: 6 feet (1829mm) COBRA In-ground Traffic Spike Section - Non-Penetrating Teeth, Galvanized.
** NOTE TO SPECIFIER ** Delete if not required.
C. Surface Mounted Traffic Spike Systems:
1. Product: As manufactured by Guardian Traffic Systems, LLC.
** NOTE TO SPECIFIER ** Delete product not required.
a. Model 1230.100: 3 feet (914mm) COBRA Surface Mount Traffic Spike Section.
b. Model 1230.120: 3 feet (914mm) COBRA Surface Mount Traffic Spike Section - Galvanized.
c. Model 1230.150: 3 feet (914mm) COBRA Surface Mount Traffic Spike Section - Non-Penetrating Teeth.
d. Model 1230.170: 3 feet (914mm) COBRA Surface Mount Traffic Spike Section - Non-Penetrating Teeth, Galvanized.
e. Model 1230.180: 18 inches (457mm) COBRA Surface Mount Spacer.
f. Model 1230.182: 18 inches (457mm) COBRA Surface Mount Spacer - Galvanized.
g. Model 1230.190: 7 inches (178mm) COBRA End Bevel - Set of two.
h. Model 1230.192: 7 inches (178mm) COBRA End Bevel Galvanized. Set of two.
i. Model 1230.200: 18 inches (457mm) COBRA Surface Mount Traffic Spike Section - Yellow.
** NOTE TO SPECIFIER ** Delete if not required.
D. In-Ground Truck Traffic Spike Systems:
1. Product: As manufactured by Guardian Traffic Systems, LLC.
** NOTE TO SPECIFIER ** Delete product not required.
a. Model 1167.100: 3 feet (914mm) COBRA II Heavy Duty In-ground Traffic Spike Section.
b. Model 1167.120: 3 feet (914mm) COBRA II Heavy Duty In-ground Traffic Spike Section - Galvanized.
** NOTE TO SPECIFIER ** Delete if not required.
E. Surface Mounted Truck Traffic Spike Systems
1. Product: As manufactured by Guardian Traffic Systems, LLC.
** NOTE TO SPECIFIER ** Delete product not required.
a. Model 1236.100: 3 feet (914mm) COBRA II Heavy Duty Surface Mount Traffic Spike Section.
b. Model 1236.120: 3 feet (914mm) COBRA II Heavy Duty Surface Mount Traffic Spike Section - Galvanized.
c. Model 1236.180: 18 inches (457mm) COBRA II Heavy Duty Surface Mount Spacer
d. Model 1236.182: 18 inches (457mm) COBRA II Heavy Duty Surface Mount Spacer - Galvanized
e. Model 1236.190: 7 inches (178mm) COBRA II Heavy Duty End Bevel - Set of two.
f. Model 1236.192: 7 inches (178mm) COBRA II Heavy Duty End Bevel Galvanized. Set of two.
** NOTE TO SPECIFIER ** Pedestrian-Friendly Concealed Traffic System is engineered and designed with below-grade spikes that will puncture the tires of offending vehicles while providing above-grade, non-penetrating teeth. The below grade teeth stay submerged until activated by wrong-way traffic. Only then is the spiked tooth exposed, puncturing the tire of the offending vehicle. The Stingray is ideal for shopping districts, schools, and private communities where a large amount of pedestrian traffic exists. Delete if not required.
F. Pedestrian-Friendly Concealed Traffic System:
1. Stingray Model 1134.100: 3 feet (914 mm) Concealed Traffic Spike Section as manufactured by Guardian Traffic Systems, LLC. Unit shall have spring-loaded and counter-balanced teeth.
** NOTE TO SPECIFIER ** Delete if not required.
G. Accessories:
** NOTE TO SPECIFIER ** Delete product and model not required.
1. Warning Signs:
a. Model 1410.100: GUARDIAN Warning Sign - Lighted.
b. Model 1414.100: GUARDIAN Warning Sign - Reflective.
2. Warning Sign Posts:
a. Model 1416.100: GUARDIAN Warning Sign Post - In-ground Set - 6 feet (1829 mm).
b. Model 1416.110: GUARDIAN Warning Sign Post - Surface Mount - Bolt to Concrete - 4 feet (1219 mm).
3. Epoxy:
a. Model 1425.100: Epoxy - Standard Set - 1 Gallon (3.8 L).
4. Speed Bumps:
a. Model 1430.160: 2 inches by 10 inches by 6 feet (51 mm by 254 mm by 1829 mm) Standard Speed Bump - Yellow.
5. Delineator:
a. Model 1435.100: 4 inches by 4 inches (102 mm by 102 mm) Yellow Traffic Delineator.
** NOTE TO SPECIFIER ** Motorized Traffic Spike Systems provide reliable access traffic control by electro-mechanically moving the teeth up to an active or secured position, and then down to allow unrestricted passage to authorized vehicles. Delete if not required.
2.3 MOTORIZED TRAFFIC SPIKE SYSTEMS
A. Construction:
1. Fully integrated system with access control. Modular design allows up to 3 - 3 feet extensions (requires 1 hp system and longer arm).
2. Motor: 1/2 hp and 1 hp as required. (115 VAC and 220 VAC available. Refer to drawings).
3. System Includes: Barrier gate operator (will accept up to a 14 feet (4267mm) arm). 4 feet (1219 mm) tunnel. 6 feet (1829 mm) teeth. 7 inches (178 mm) end bevel for surface mounted applications.
** NOTE TO SPECIFIER ** Delete if not required.
B. Motorized - In-Ground Traffic Spike Systems:
1. Product: As manufactured by Guardian Traffic Systems, LLC.
** NOTE TO SPECIFIER ** Delete product not required.
a. Model 1310.100: ENFORCER Motorized In-ground Traffic Spike System - 1/2 HP-115 VAC. Accepts 12 feet to 14 feet (3658 mm to 4267 mm) arm as required.
b. Model 1310.200: ENFORCER Motorized In-ground Traffic Spike System - 1 HP-115 VAC. Accepts 16 feet to 20 feet (4877 mm to 6096 mm) arm as required.
c. Model 1310.300: ENFORCER Motorized In-ground Traffic Spike Extension. 3 feet (914mm).
** NOTE TO SPECIFIER ** Delete if not required.
C. Motorized - Surface Mount Traffic Spike Systems:
1. Product: As manufactured by Guardian Traffic Systems, LLC.
** NOTE TO SPECIFIER ** Delete product not required.
a. Model 1320.100: ENFORCER Motorized Surface Mount Traffic Spike System - 1/2 HP- 115 VAC. Accepts 12 feet to 14 feet (3658 mm to 4267 mm) arm as required.
b. Model 1320.200: ENFORCER Motorized Surface Mount Traffic Spike System - 1HP- 115 VAC. Accepts 16 feet to 20 feet (4877 mm to 6096 mm) arm as required.
c. Model 1320.300: ENFORCER Motorized Surface Mount Traffic Spike Extension - 3 feet (914mm).
D. Lights and Signs:
1. Product: As manufactured by Guardian Traffic Systems, LLC.
** NOTE TO SPECIFIER ** Delete product not required.
a. Model 1334.100: ENFORCER Stop-Go Signal, 115 VAC with post and mounting bracket.
b. Model 1334.200: ENFORCER Stop-Go Signal, 220 VAC with post and mounting bracket.
c. Model 1334.100: Stop and Go Light.
d. Model 1410.100: GUARDIAN Warning Sign, Lighted.
e. Model 1414.100: GUARDIAN Warning Sign, Reflective.
f. Model 1416.100: GUARDIAN Warning Sign Post - In-ground Set.
g. Model 1416.110: GUARDIAN Warning Sign Post - Surface Mount with Flange.
E. Gate Arms:
1. Product: As manufactured by Guardian Traffic Systems, LLC.
** NOTE TO SPECIFIER ** Delete product not required.
a. Model 1340.112: Aluminum Arm - 12 feet (3658 mm).
b. Model 1340.114: Aluminum Arm - 14 feet (4267 mm).
c. Model 1350.112: PVC Arm - 12 feet (3658 mm).
d. Model 1360.112: Wood Arm - 12 feet (3658 mm).
e. Model 1360.114: Wood Arm - 14 feet (4267 mm).
f. Model 1360.116: Wood Wishbone Arm - 16 feet (4877 mm).
g. Model 1360.120: Wood Wishbone Arm - 20 feet (6096 mm).
F. Power Accessories:
1. Product: As manufactured by Guardian Traffic Systems, LLC.
** NOTE TO SPECIFIER ** Delete product not required.
a. Model 1330.100: ENFORCER Battery Backup System.
b. Model 1332.100: ENFORCER Heater.
c. Model 1336.100: AC Line Surge Suppressor.
d. Model 1336.200: Telephone Entry Surge Suppressor.
e. Model 1336.300: Reader / Key Pad Surge Suppressor.
f. Model 1336.400: Loop Detector Surge Protector.
** NOTE TO SPECIFIER ** Delete if not required.
G. Loops and Detectors:
1. Product: As manufactured by Guardian Traffic Systems, LLC.
** NOTE TO SPECIFIER ** Delete product not required.
a. Model 1370.100: Loop Detector - Plug in on Circuit Board
b. Model 1375.100: Loop, Preformed, 4' X 8' with Tail (flexible with 4 turns per loop - for new construction)
c. Model 1375.200: Loop, Surface Mount.
d. Model 1375.300: Loop Wire - 500 feet (152 m) AWG 18.
e. Model 1380.100: Loop Sealant - 1 Gallon (3.8 l).
f. Model 1380.200: Loop Sealant - Tube.
g. Model 1380.300: Loop Sealant - Applicator.
h. Model 1385.100: Loop Backer Rod - 100 feet (30.5 m) Rolls.
** NOTE TO SPECIFIER ** Delete if not required.
H. Access Control Devices:
1. Product: AVI - Automatic Vehicle Identification Systems as manufactured by Guardian Traffic Systems, LLC.
** NOTE TO SPECIFIER ** Delete product not required.
a. Model 1500.100: EgO AVI - RFID Reader.
b. Model 1500.200: EgO 12 feet (3658 mm) Cable.
c. Model 1500.300: EgO Transformer.
d. Model 1500.400: EgO Reader Attachment Bracket.
e. Model 1500.500: EgO AVI - RFID Tags.
2. Product: Heating Cables as manufactured by Guardian Traffic Systems, LLC.
** NOTE TO SPECIFIER ** Delete product not required.
a. Model 1440.124: 24 feet (7.3 m) Stainless Steel Heater Cable - 1000 Watt - 120 Volt.
b. Model 1440.148: 48 feet (14.6 m) Stainless Steel Heater Cable - 1000 Watt - 120 Volt.
c. Model 1442.100: 30 AMP Thermostat - NEMA Housing with 10 feet (3048 mm) Capillary Sensing Tube.
** NOTE TO SPECIFIER ** Delete if not required.
3. Product: Sensor Reversing Edge as manufactured by Guardian Traffic Systems, LLC.
a. Model 1450.100: Non-contact Sensor.
4. Product: Card Readers as manufactured by Guardian Traffic Systems, LLC.
** NOTE TO SPECIFIER ** Delete product not required.
a. Model 1510.100: Proximity Card Reader - Stand Alone w/controller; Card Reader and transformer.
b. Model 1515.100: Proximity Card Reader System - Controller.
c. Model 1515.120: Proximity Card Reader - Satellite Board.
d. Model 1515.150: Proximity Card Reader - Transformer.
e. Model 1515.160: Battery Back Up System.
f. Model 1518.100: Proximity Card Reader.
g. Model 1518.200: Proximity Card Reader.
h. Model 1520.100: Proximity Cards.
i. Model 1520.200: Proximity Key Fobs.
** NOTE TO SPECIFIER ** Delete if not required.
I. Communication Devices:
1. Product: As manufactured by Guardian Traffic Systems, LLC.
** NOTE TO SPECIFIER ** Delete product not required.
a. Model 1525.100: AIPHONE Intercom, 3 Call Master (Base) LEF-3L.
b. Model 1525.200: AIPHONE Intercom, 5 Call Master (Base).
c. Model 1525.300: AIPHONE Intercom Remote Station.
d. Model 1525.400: AIPHONE Intercom Power Supply.
e. Model 1525.500: AIPHONE Speaker.
f. Model 1530.100: GUARDIAN Telephone Entry System.
** NOTE TO SPECIFIER ** Delete if not required.
2. Product: Key Pads as manufactured by Guardian Traffic Systems, LLC.
a. Model 1535.100: Keypad Entry Device.
3. Product: Switches as manufactured by Guardian Traffic Systems, LLC.
** NOTE TO SPECIFIER ** Delete product not required.
a. Model 1540.100: Switch - 1 Button Open Interior use.
b. Model 1540.120: Switch - 2 Button Open / Close Interior use.
c. Model 1540.130: Switch - Exterior 1 Button Surface Mount.
d. Model 1540.140: Switch - Exterior 2 Button Surface Mount Open / Close.
e. Model 1540.150: Lock Out Control Station 2 Button Exterior Surface Mount Open/Close.
f. Model 1540.160 Switch Exterior Surface Mount Tamperproof Open / Close.
4. Product: Gooseneck Post as manufactured by Guardian Traffic Systems, LLC.
** NOTE TO SPECIFIER ** Delete product not required.
a. Model 1420.100: GUARDIAN Gooseneck Post 2" TS X 5'-6" - In-ground Set.
b. Model 1420.200: GUARDIAN Gooseneck Post 2" TS X 3'-6" - Surface Mount with flange.
5. Product: Radio Receivers and Transmitters as manufactured by Guardian Traffic Systems, LLC.
** NOTE TO SPECIFIER ** Delete product not required.
a. Model 1545.100: Radio Receiver, Standard.
b. Model 1546.100: Radio Transmitter, Single Button.
c. Model 1547.100: Radio Receiver, Passport.
d. Model 1548.100: Radio Transmitter, Passport - Single Button.
6. Product: CCTV Systems - Closed Circuit Television Systems as manufactured by Guardian Traffic Systems, LLC.
** NOTE TO SPECIFIER ** Delete product not required.
a. Model 1550.100: IQEYE Camera.
b. Model 1550.120: Lens.
c. Model 1550.140: Camera Housing with Bracket.
d. Model 1560.100: Digital Video Recorder (Systems Built to Specifications).
** NOTE TO SPECIFIER ** Delete if not required.
7. Product: Epoxy as manufactured by Guardian Traffic Systems, LLC.
a. Model 1425.100: Epoxy - Standard Set - 1 Gallon (3.8 L).
** NOTE TO SPECIFIER ** Delete if not required.
8. Product: Speed Bumps as manufactured by Guardian Traffic Systems, LLC.
a. Model 1430.160: 2 inches by 10 inches by 6 feet (51 mm by 254 mm by 1829 mm) Standard Speed Bump - Yellow. includes epoxy and spikes.
** NOTE TO SPECIFIER ** Delete if not required.
9. Product: Delineator as manufactured by Guardian Traffic Systems, LLC.
a. Model 1435.100: 4 inches by 4 inches (102 mm by 102 mm) Yellow Traffic Delineator.
PART 3 EXECUTION
3.1 EXAMINATION
A. Do not begin installation until installation preparations have been properly prepared.
B. If substrate preparation is the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding.
3.2 PREPARATION
A. Clean surfaces thoroughly prior to installation.
B. Prepare surfaces using the methods recommended by the manufacturer for achieving the best result for the substrate under the project conditions.
3.3 INSTALLATION
A. Install in accordance with manufacturer's instructions.
3.4 PROTECTION
A. Protect installed products until completion of project.
B. Touch-up, repair or replace damaged products before Substantial Completion.
END OF SECTION
SECTION 02842
TRAFFIC DIRECTIONAL CONTROL DEVICES
Display hidden notes to specifier. (Don't know how?Click Here)
** NOTE TO SPECIFIER ** Guardian Traffic Systems, LLC; Traffic controls and traffic signage. . This section is based on the products of Guardian Traffic Systems, LLC, which is located at:
GUARDIAN TRAFFIC SYSTEMS manufactures an extensive and impressive line of Access and Traffic Control products sold around the world for commercial, government, education and military applications helping to solve your traffic or access control problems. COBRA Traffic Spike Systems are designed and engineered to allow traffic to proceed freely in one direction only. Cobra Systems provide extremely effective one-way directional traffic control. STINGRAY Pedestrian Friendly Concealed Traffic Systems are engineered and designed with below grade spikes that will puncture the tire of offending vehicles while providing above grade non-penetrating teeth. ENFORCER Motorized Traffic Spike Systems provide reliable access traffic control by electro-mechanically moving the teeth up to an active or secured position, and then down to allow unrestricted passage to authorized vehicles.
PART 1 GENERAL
1.1 SECTION INCLUDES
** NOTE TO SPECIFIER ** Delete items below not required for project.
A. Traffic control equipment.
1.2 RELATED SECTIONS
** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.
A. Section 02840 - Traffic Barriers.
B. Section 02840 - Walk, Road and Parking Appurtenances.
C. Section 11150 - Parking Control Equipment.
1.3 SUBMITTALS
A. Submit under provisions of Section 01300.
B. Shop Drawings:
1. Provide layout of traffic control ground spikes showing coordination with parking equipment and drive lanes.
** NOTE TO SPECIFIER ** Delete if not required.
2. Provide layout of control/access equipment with electrical schematics if motorized or monitored.
C. Product Data: Manufacturer's data sheets on each product to be used, including:
1. Preparation instructions and recommendations.
2. Storage and handling requirements and recommendations.
3. Installation methods.
1.4 QUALITY ASSURANCE
A. Manufacturer's Qualifications: Not less than 5 years experience in the actual production of specified products.
B. Installer's Qualifications: Firm with not less than 5 years experiences in installation of systems similar in complexity to those required for this Project, including specific requirements indicated.
** NOTE TO SPECIFIER ** Include a mock-up if the project size and/or quality warrant taking such a precaution. The following is one example of how a mock-up on a large project might be specified. When deciding on the extent of the mock-up, consider all the major different types of work on the project.
C. Mock-Up: Provide a mock-up for evaluation of surface coordination and application workmanship.
1. Install in areas designated by Architect.
2. Do not proceed with remaining work until workmanship and operation are approved by Architect.
3. Modify mock-up area as required to produce acceptable work.
1.5 DELIVERY, STORAGE, AND HANDLING
A. Store products in manufacturer's unopened packaging until ready for installation.
B. Store and dispose of solvent-based materials, and materials used with solvent-based materials, in accordance with requirements of local authorities having jurisdiction.
1.6 PROJECT CONDITIONS
A. Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's absolute limits.
1.7 WARRANTY
** NOTE TO SPECIFIER ** Refer to manufacturer's literature fro limited extended warranties available on products offered. Delete if not required.
A. Limited Warranty:
PART 2 PRODUCTS
2.1 MANUFACTURERS
A. Acceptable Manufacturer: Guardian Traffic Systems, LLC; 4261 S. Country Club Rd.; Tucson, AZ 85714-2009; Toll Free Tel: (800) 866-9115; Tel: (520) 881-3380; Fax: (520)320-1820; Email:sales@guardiantraffic.com. Web:www.guardiantraffic.com.
** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.
B. Substitutions: Not permitted.
C. Requests for substitutions will be considered in accordance with provisions of Section 01600.
** NOTE TO SPECIFIER ** Guardian Traffic Spike Systems are engineered to be used at a maximum speed of 5 miles per hour. Vehicles must pass over the unit so that the tire is parallel to the teeth and not at any angle. Traffic Spike Systems require Warning Signs. Locating and installing a Traffic Spike System incorrectly or not using warning signs invalidates any implied or real warranty. Delete if not required.
2.2 TRAFFIC CONTROL TIRE SPIKES
** NOTE TO SPECIFIER ** Traffic Spike Systems are designed and engineered to allow traffic to proceed freely in one direction only. Cobra Systems provide extremely effective one-way directional traffic control. Delete if not required.
A. Construction:
1. Provide design of modular construction allowing width adjustment. Durable spring loaded teeth with counter-balanced back-up. Specially engineered teeth that eliminates tire damage in unrestricted direction. Built-in latch down.
2. Heavy duty steel construction, top plate mounted components with durable stainless steel spring. Zinc plated moving parts.
** NOTE TO SPECIFIER ** Delete if not required.
B. In-Ground Traffic Spike Systems:
1. Product: As manufactured by Guardian Traffic Systems, LLC.
** NOTE TO SPECIFIER ** Delete product not required.
a. Model 1130.100: 3 feet (914mm) COBRA In-ground Traffic Spike Section.
b. Model 1130.120: 3 feet (914mm) COBRA In-ground Traffic Spike Section - Galvanized.
c. Model 1130.150: 3 feet (914mm) COBRA In-ground Traffic Spike Section - Non-Penetrating Teeth.
d. Model 1130.170: 3 feet (914mm) COBRA In-ground Traffic Spike Section - Non-Penetrating Teeth - Galvanized.
e. Model 1160.100: 6 feet (1829mm) COBRA In-ground Traffic Spike Section.
f. Model 1160.120: 6 feet (1829mm) COBRA In-ground Traffic Spike Section - Galvanized.
g. Model 1160.150: 6 feet (1829mm) COBRA In-ground Traffic Spike Section - Non-Penetrating Teeth.
h. Model 1160.170: 6 feet (1829mm) COBRA In-ground Traffic Spike Section - Non-Penetrating Teeth, Galvanized.
** NOTE TO SPECIFIER ** Delete if not required.
C. Surface Mounted Traffic Spike Systems:
1. Product: As manufactured by Guardian Traffic Systems, LLC.
** NOTE TO SPECIFIER ** Delete product not required.
a. Model 1230.100: 3 feet (914mm) COBRA Surface Mount Traffic Spike Section.
b. Model 1230.120: 3 feet (914mm) COBRA Surface Mount Traffic Spike Section - Galvanized.
c. Model 1230.150: 3 feet (914mm) COBRA Surface Mount Traffic Spike Section - Non-Penetrating Teeth.
d. Model 1230.170: 3 feet (914mm) COBRA Surface Mount Traffic Spike Section - Non-Penetrating Teeth, Galvanized.
e. Model 1230.180: 18 inches (457mm) COBRA Surface Mount Spacer.
f. Model 1230.182: 18 inches (457mm) COBRA Surface Mount Spacer - Galvanized.
g. Model 1230.190: 7 inches (178mm) COBRA End Bevel - Set of two.
h. Model 1230.192: 7 inches (178mm) COBRA End Bevel Galvanized. Set of two.
i. Model 1230.200: 18 inches (457mm) COBRA Surface Mount Traffic Spike Section - Yellow.
** NOTE TO SPECIFIER ** Delete if not required.
D. In-Ground Truck Traffic Spike Systems:
1. Product: As manufactured by Guardian Traffic Systems, LLC.
** NOTE TO SPECIFIER ** Delete product not required.
a. Model 1167.100: 3 feet (914mm) COBRA II Heavy Duty In-ground Traffic Spike Section.
b. Model 1167.120: 3 feet (914mm) COBRA II Heavy Duty In-ground Traffic Spike Section - Galvanized.
** NOTE TO SPECIFIER ** Delete if not required.
E. Surface Mounted Truck Traffic Spike Systems
1. Product: As manufactured by Guardian Traffic Systems, LLC.
** NOTE TO SPECIFIER ** Delete product not required.
a. Model 1236.100: 3 feet (914mm) COBRA II Heavy Duty Surface Mount Traffic Spike Section.
b. Model 1236.120: 3 feet (914mm) COBRA II Heavy Duty Surface Mount Traffic Spike Section - Galvanized.
c. Model 1236.180: 18 inches (457mm) COBRA II Heavy Duty Surface Mount Spacer
d. Model 1236.182: 18 inches (457mm) COBRA II Heavy Duty Surface Mount Spacer - Galvanized
e. Model 1236.190: 7 inches (178mm) COBRA II Heavy Duty End Bevel - Set of two.
f. Model 1236.192: 7 inches (178mm) COBRA II Heavy Duty End Bevel Galvanized. Set of two.
** NOTE TO SPECIFIER ** Pedestrian-Friendly Concealed Traffic System is engineered and designed with below-grade spikes that will puncture the tires of offending vehicles while providing above-grade, non-penetrating teeth. The below grade teeth stay submerged until activated by wrong-way traffic. Only then is the spiked tooth exposed, puncturing the tire of the offending vehicle. The Stingray is ideal for shopping districts, schools, and private communities where a large amount of pedestrian traffic exists. Delete if not required.
F. Pedestrian-Friendly Concealed Traffic System:
1. Stingray Model 1134.100: 3 feet (914 mm) Concealed Traffic Spike Section as manufactured by Guardian Traffic Systems, LLC. Unit shall have spring-loaded and counter-balanced teeth.
** NOTE TO SPECIFIER ** Delete if not required.
G. Accessories:
** NOTE TO SPECIFIER ** Delete product and model not required.
1. Warning Signs:
a. Model 1410.100: GUARDIAN Warning Sign - Lighted.
b. Model 1414.100: GUARDIAN Warning Sign - Reflective.
2. Warning Sign Posts:
a. Model 1416.100: GUARDIAN Warning Sign Post - In-ground Set - 6 feet (1829 mm).
b. Model 1416.110: GUARDIAN Warning Sign Post - Surface Mount - Bolt to Concrete - 4 feet (1219 mm).
3. Epoxy:
a. Model 1425.100: Epoxy - Standard Set - 1 Gallon (3.8 L).
4. Speed Bumps:
a. Model 1430.160: 2 inches by 10 inches by 6 feet (51 mm by 254 mm by 1829 mm) Standard Speed Bump - Yellow.
5. Delineator:
a. Model 1435.100: 4 inches by 4 inches (102 mm by 102 mm) Yellow Traffic Delineator.
** NOTE TO SPECIFIER ** Motorized Traffic Spike Systems provide reliable access traffic control by electro-mechanically moving the teeth up to an active or secured position, and then down to allow unrestricted passage to authorized vehicles. Delete if not required.
2.3 MOTORIZED TRAFFIC SPIKE SYSTEMS
A. Construction:
1. Fully integrated system with access control. Modular design allows up to 3 - 3 feet extensions (requires 1 hp system and longer arm).
2. Motor: 1/2 hp and 1 hp as required. (115 VAC and 220 VAC available. Refer to drawings).
3. System Includes: Barrier gate operator (will accept up to a 14 feet (4267mm) arm). 4 feet (1219 mm) tunnel. 6 feet (1829 mm) teeth. 7 inches (178 mm) end bevel for surface mounted applications.
** NOTE TO SPECIFIER ** Delete if not required.
B. Motorized - In-Ground Traffic Spike Systems:
1. Product: As manufactured by Guardian Traffic Systems, LLC.
** NOTE TO SPECIFIER ** Delete product not required.
a. Model 1310.100: ENFORCER Motorized In-ground Traffic Spike System - 1/2 HP-115 VAC. Accepts 12 feet to 14 feet (3658 mm to 4267 mm) arm as required.
b. Model 1310.200: ENFORCER Motorized In-ground Traffic Spike System - 1 HP-115 VAC. Accepts 16 feet to 20 feet (4877 mm to 6096 mm) arm as required.
c. Model 1310.300: ENFORCER Motorized In-ground Traffic Spike Extension. 3 feet (914mm).
** NOTE TO SPECIFIER ** Delete if not required.
C. Motorized - Surface Mount Traffic Spike Systems:
1. Product: As manufactured by Guardian Traffic Systems, LLC.
** NOTE TO SPECIFIER ** Delete product not required.
a. Model 1320.100: ENFORCER Motorized Surface Mount Traffic Spike System - 1/2 HP- 115 VAC. Accepts 12 feet to 14 feet (3658 mm to 4267 mm) arm as required.
b. Model 1320.200: ENFORCER Motorized Surface Mount Traffic Spike System - 1HP- 115 VAC. Accepts 16 feet to 20 feet (4877 mm to 6096 mm) arm as required.
c. Model 1320.300: ENFORCER Motorized Surface Mount Traffic Spike Extension - 3 feet (914mm).
D. Lights and Signs:
1. Product: As manufactured by Guardian Traffic Systems, LLC.
** NOTE TO SPECIFIER ** Delete product not required.
a. Model 1334.100: ENFORCER Stop-Go Signal, 115 VAC with post and mounting bracket.
b. Model 1334.200: ENFORCER Stop-Go Signal, 220 VAC with post and mounting bracket.
c. Model 1334.100: Stop and Go Light.
d. Model 1410.100: GUARDIAN Warning Sign, Lighted.
e. Model 1414.100: GUARDIAN Warning Sign, Reflective.
f. Model 1416.100: GUARDIAN Warning Sign Post - In-ground Set.
g. Model 1416.110: GUARDIAN Warning Sign Post - Surface Mount with Flange.
E. Gate Arms:
1. Product: As manufactured by Guardian Traffic Systems, LLC.
** NOTE TO SPECIFIER ** Delete product not required.
a. Model 1340.112: Aluminum Arm - 12 feet (3658 mm).
b. Model 1340.114: Aluminum Arm - 14 feet (4267 mm).
c. Model 1350.112: PVC Arm - 12 feet (3658 mm).
d. Model 1360.112: Wood Arm - 12 feet (3658 mm).
e. Model 1360.114: Wood Arm - 14 feet (4267 mm).
f. Model 1360.116: Wood Wishbone Arm - 16 feet (4877 mm).
g. Model 1360.120: Wood Wishbone Arm - 20 feet (6096 mm).
F. Power Accessories:
1. Product: As manufactured by Guardian Traffic Systems, LLC.
** NOTE TO SPECIFIER ** Delete product not required.
a. Model 1330.100: ENFORCER Battery Backup System.
b. Model 1332.100: ENFORCER Heater.
c. Model 1336.100: AC Line Surge Suppressor.
d. Model 1336.200: Telephone Entry Surge Suppressor.
e. Model 1336.300: Reader / Key Pad Surge Suppressor.
f. Model 1336.400: Loop Detector Surge Protector.
** NOTE TO SPECIFIER ** Delete if not required.
G. Loops and Detectors:
1. Product: As manufactured by Guardian Traffic Systems, LLC.
** NOTE TO SPECIFIER ** Delete product not required.
a. Model 1370.100: Loop Detector - Plug in on Circuit Board
b. Model 1375.100: Loop, Preformed, 4' X 8' with Tail (flexible with 4 turns per loop - for new construction)
c. Model 1375.200: Loop, Surface Mount.
d. Model 1375.300: Loop Wire - 500 feet (152 m) AWG 18.
e. Model 1380.100: Loop Sealant - 1 Gallon (3.8 l).
f. Model 1380.200: Loop Sealant - Tube.
g. Model 1380.300: Loop Sealant - Applicator.
h. Model 1385.100: Loop Backer Rod - 100 feet (30.5 m) Rolls.
** NOTE TO SPECIFIER ** Delete if not required.
H. Access Control Devices:
1. Product: AVI - Automatic Vehicle Identification Systems as manufactured by Guardian Traffic Systems, LLC.
** NOTE TO SPECIFIER ** Delete product not required.
a. Model 1500.100: EgO AVI - RFID Reader.
b. Model 1500.200: EgO 12 feet (3658 mm) Cable.
c. Model 1500.300: EgO Transformer.
d. Model 1500.400: EgO Reader Attachment Bracket.
e. Model 1500.500: EgO AVI - RFID Tags.
2. Product: Heating Cables as manufactured by Guardian Traffic Systems, LLC.
** NOTE TO SPECIFIER ** Delete product not required.
a. Model 1440.124: 24 feet (7.3 m) Stainless Steel Heater Cable - 1000 Watt - 120 Volt.
b. Model 1440.148: 48 feet (14.6 m) Stainless Steel Heater Cable - 1000 Watt - 120 Volt.
c. Model 1442.100: 30 AMP Thermostat - NEMA Housing with 10 feet (3048 mm) Capillary Sensing Tube.
** NOTE TO SPECIFIER ** Delete if not required.
3. Product: Sensor Reversing Edge as manufactured by Guardian Traffic Systems, LLC.
a. Model 1450.100: Non-contact Sensor.
4. Product: Card Readers as manufactured by Guardian Traffic Systems, LLC.
** NOTE TO SPECIFIER ** Delete product not required.
a. Model 1510.100: Proximity Card Reader - Stand Alone w/controller; Card Reader and transformer.
b. Model 1515.100: Proximity Card Reader System - Controller.
c. Model 1515.120: Proximity Card Reader - Satellite Board.
d. Model 1515.150: Proximity Card Reader - Transformer.
e. Model 1515.160: Battery Back Up System.
f. Model 1518.100: Proximity Card Reader.
g. Model 1518.200: Proximity Card Reader.
h. Model 1520.100: Proximity Cards.
i. Model 1520.200: Proximity Key Fobs.
** NOTE TO SPECIFIER ** Delete if not required.
I. Communication Devices:
1. Product: As manufactured by Guardian Traffic Systems, LLC.
** NOTE TO SPECIFIER ** Delete product not required.
a. Model 1525.100: AIPHONE Intercom, 3 Call Master (Base) LEF-3L.
b. Model 1525.200: AIPHONE Intercom, 5 Call Master (Base).
c. Model 1525.300: AIPHONE Intercom Remote Station.
d. Model 1525.400: AIPHONE Intercom Power Supply.
e. Model 1525.500: AIPHONE Speaker.
f. Model 1530.100: GUARDIAN Telephone Entry System.
** NOTE TO SPECIFIER ** Delete if not required.
2. Product: Key Pads as manufactured by Guardian Traffic Systems, LLC.
a. Model 1535.100: Keypad Entry Device.
3. Product: Switches as manufactured by Guardian Traffic Systems, LLC.
** NOTE TO SPECIFIER ** Delete product not required.
a. Model 1540.100: Switch - 1 Button Open Interior use.
b. Model 1540.120: Switch - 2 Button Open / Close Interior use.
c. Model 1540.130: Switch - Exterior 1 Button Surface Mount.
d. Model 1540.140: Switch - Exterior 2 Button Surface Mount Open / Close.
e. Model 1540.150: Lock Out Control Station 2 Button Exterior Surface Mount Open/Close.
f. Model 1540.160 Switch Exterior Surface Mount Tamperproof Open / Close.
4. Product: Gooseneck Post as manufactured by Guardian Traffic Systems, LLC.
** NOTE TO SPECIFIER ** Delete product not required.
a. Model 1420.100: GUARDIAN Gooseneck Post 2" TS X 5'-6" - In-ground Set.
b. Model 1420.200: GUARDIAN Gooseneck Post 2" TS X 3'-6" - Surface Mount with flange.
5. Product: Radio Receivers and Transmitters as manufactured by Guardian Traffic Systems, LLC.
** NOTE TO SPECIFIER ** Delete product not required.
a. Model 1545.100: Radio Receiver, Standard.
b. Model 1546.100: Radio Transmitter, Single Button.
c. Model 1547.100: Radio Receiver, Passport.
d. Model 1548.100: Radio Transmitter, Passport - Single Button.
6. Product: CCTV Systems - Closed Circuit Television Systems as manufactured by Guardian Traffic Systems, LLC.
** NOTE TO SPECIFIER ** Delete product not required.
a. Model 1550.100: IQEYE Camera.
b. Model 1550.120: Lens.
c. Model 1550.140: Camera Housing with Bracket.
d. Model 1560.100: Digital Video Recorder (Systems Built to Specifications).
** NOTE TO SPECIFIER ** Delete if not required.
7. Product: Epoxy as manufactured by Guardian Traffic Systems, LLC.
a. Model 1425.100: Epoxy - Standard Set - 1 Gallon (3.8 L).
** NOTE TO SPECIFIER ** Delete if not required.
8. Product: Speed Bumps as manufactured by Guardian Traffic Systems, LLC.
a. Model 1430.160: 2 inches by 10 inches by 6 feet (51 mm by 254 mm by 1829 mm) Standard Speed Bump - Yellow. includes epoxy and spikes.
** NOTE TO SPECIFIER ** Delete if not required.
9. Product: Delineator as manufactured by Guardian Traffic Systems, LLC.
a. Model 1435.100: 4 inches by 4 inches (102 mm by 102 mm) Yellow Traffic Delineator.
PART 3 EXECUTION
3.1 EXAMINATION
A. Do not begin installation until installation preparations have been properly prepared.
B. If substrate preparation is the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding.
3.2 PREPARATION
A. Clean surfaces thoroughly prior to installation.
B. Prepare surfaces using the methods recommended by the manufacturer for achieving the best result for the substrate under the project conditions.
3.3 INSTALLATION
A. Install in accordance with manufacturer's instructions.
3.4 PROTECTION
A. Protect installed products until completion of project.
B. Touch-up, repair or replace damaged products before Substantial Completion.
